> Beryllium Copper Alloys
· Beryllium Copper Strip
· Beryllium Copper Wire
· Beryllium Copper Plate
· Beryllium Copper Tube
· Casting Alloys
· Beryllium Master Alloys
· Beryllium Copper Sleeves
· Plunger tips
· EMI Finger stock
· Welding electrode/parts
· Drill String Components
· Canted Coil Springs
> Resistance Welding Alloys
> Aluminum Bronze Alloys
> Silicon Bronze Alloys
> Nickel Silver Alloys
> Phosphor Bronze Alloys
> Leaded Commercial Bronze
> Leaded Nickel Copper
> Cadmium Sheet
> Cadmium Copper
> Cadmium Tin Copper
> Cadmium Chromium Copper
> Copper Master Alloys
CuNi2Si – UNS.C64700 / C70250 Copper Nickel Silicon Alloys
C64700/C70250 Details & Applications:
C64700/C70250 Copper Nickel Silicon
CuNi2Si – UNS.C64700/C70250 Nickel Silicon Bronze Alloys, which is an age-hardening alloy, higher alloyed in comparison with CuNi1.5Si, for current-carrying formed parts. It has an a-structure with very fine precipitations and recommends itself both for lead frames which require a high rigidity of the pins and for connector with high demands on the electrical conductivity, strength and relaxation behavior. In addition, the CuNi2Si can also be used for current-carrying formed parts and contact springs due to its good fatigue strength, forming and spring properties.
Typical Application for C64700/C70250 Nickel Silicon Bronze Alloys:
Electrical : Resistance Welding Electrodes, Motor Rotor Bar, And Resistance Welding Tips.
Fastener : Fastener parts
Industrial : Brazing Rod, Welding Rod
Custom Diameter & Sizes, Random Mill lengths
Available Products (forms):
Round bars, Flat bars, Square bars, Rectangular bars, Hexagon bars
Custom shapes are available upon request.
Fe: 0.10% Max.
Zn: 0.50% Max.
Note: Copper plus additions equal 99.50% minimum.
Typical Physical Properties:
Specific Gravity: 8.80-8.90 g/cm3
Coefficient of Thermal Expansion per °C: 17 x 10-6 /K (20-300°C)
Electrical Conductivity (% IACS): 38 (22 Ms/m)
Thermal Conductivity (W/mk): 250
Modulus of Elasticity (10 3 MPA): 130
1). the units are based upon US Customary.
2). the typical physical properties apply to age hardened products.
Rods/Bars/Plates/Sheets: UNS.C64700, UNS.C70250, RWMA Class 3
European Standards: CuNi2Si, DIN 2.0855, CW111C to EN
ASTM: American Society for Testing and Materials
RWMA: Resistance Welder Manufacturers' Association
Note: Unless otherwise specified, material will be produced to DIN & RWMA.
CHECK the ALB Copper Alloys feature on specialty copper alloys for Automotive industry.
CHECK the ALB Copper Alloys feature on specialty copper alloys for Aerospace industry.
CHECK the ALB Copper Alloys feature on specialty copper alloys for RWMA industry.
CHECK the ALB Copper Alloys feature on specialty copper alloys for Plastic Mould industry.