> Beryllium Copper Alloys
· Beryllium Copper Strip
· Beryllium Copper Wire
· Beryllium Copper Plate
· Beryllium Copper Tube
· Casting Alloys
· Beryllium Master Alloys
· Beryllium Copper Sleeves
· Plunger tips
· EMI Finger stock
· Welding electrode/parts
· Drill String Components
· Canted Coil Springs
> Resistance Welding Alloys
> Aluminum Bronze Alloys
> Silicon Bronze Alloys
> Nickel Silver Alloys
> Phosphor Bronze Alloys
> Leaded Commercial Bronze
> Leaded Nickel Copper
> Cadmium Sheet
> Cadmium Copper
> Cadmium Tin Copper
> Cadmium Chromium Copper
> Copper Master Alloys
CuNiBeTi (BrNBT) Nickel Titanium Beryllium Copper Rod / Bar
A). CuNiBeTi (BrNBT) Details
CuNiBeTi (BrNBT) Nickel Titanium Beryllium Copper
CuNiBeTi ---BrNBT Nickel Titanium Beryllium Copper is the mirror image of alloys C17510 in terms of its properties & Characteristics. CuNiBeTi is also primarily utilized in the industry applications that require most highly thermal or electrical conductivity, which features a Nickel alloying addition (1.40-1.80%). C17510 also offers good strength and hardness characteristics coupled with conductivity in the range of 45-60 percent of copper with ultimate tensile and hardness properties approaching 140 ksi and RB 100 respectively and with abt. 0.10% Titanium can refine and minimize the grain sizes of the beryllium copper alloys.
Typical Application for CuNiBeTi (BrNBT) Nickel Titanium Beryllium Copper :
Electrical Industry: Fuse Clips, Switch Parts, Relay parts, Connectors, Spring Connectors, Instruments Parts
Fasteners: Washers, Fasteners
Industrial: Springs, Thermal Transfer Plates, Welding Equipments, High Flux Electromagnets, Die–Casting Plunger Tips.
Available Sizes:
Custom Diameter & Sizes, Random Mill lengths
Available Products (forms):
Round bars, Flat bars, Square bars, Rectangular bars, Hexagon bars,
Round wires, Plates, Sheets
Custom shapes are available upon request.
B).
CuNiBeTi (BrNBT) Nickel Titanium Beryllium Copper
Chemical Composition
Be: 0.20-0.40%
Ni: 1.40-1.80%
Ti: 0.05-0.15%
Cu: Balance
Note: Copper plus additions equal 99.5% minimum.
C).
CuNiBeTi (BrNBT) Nickel Titanium Beryllium Copper
Typical Physical Properties
Density (g/cm3): 8.83
Density before age hardening (g/cm3): 8.75
Elastic Modulus (kg/mm2 (103)): 14.10
Thermal Expansion Coefficient (20 °C to 200 °C m/m/°C): 18 x 10-6
Thermal Conductivity (cal/(cm-s-°C)): 0.57
Melting Range (°C): 1000-1070
Note:
1). the units are based upon Metric.
2). the typical physical properties apply to age hardened products.
D).
CuNiBeTi (BrNBT) Nickel Titanium Beryllium Copper
International Specification
Rods/Bars/Tubes: ASTM B441, SAE J461,463; RWMA Class 3
Strips: ASTM B534, RWMA Class 3
Sheets: ASTM B534, RWMA Class 3
Wires: ASTM B441
Plates: ASTM B534, SAE J461,463; RWMA Class 3
European Standards: CuNiBeTi, BrNBT, DIN.2.0850, CW110C to EN
Note:
ASTM: American Society for Testing and Materials
SAE: Society of Automotive Engineers
AMS: Aerospace Materials Specification (Published by SAE)
RWMA: Resistance Welder Manufacturers' Association
Note: Unless otherwise specified, material will be produced to ASTM.
E).
CuNiBeTi (BrNBT) Nickel Titanium Beryllium Copper
Mechanical Properties:
The Mechanical Properties will be available on request from customers.
Most Commonly Temper Used:
Rods/Bars: A(TB00),H(TD04),AT(TF00),HT(TH04)
Sheets: A(TB00),1/4 H(TD01),1/2 H(TD02),H(TD04),AT(TF00)
Wires: A(TB00),1/4 H(TD01),1/2 H(TD02),3/4H(TD03),H(TD04)
Plates: AT(TF00),HT(TH04)
F).
CuNiBeTi (BrNBT) Nickel Titanium Beryllium Copper
RFQ:
CHECK the ALB Copper Alloys feature on specialty copper alloys for Automotive industry.
CHECK the ALB Copper Alloys feature on specialty copper alloys for Aerospace industry.
CHECK the ALB Copper Alloys feature on specialty copper alloys for RWMA industry.
CHECK the ALB Copper Alloys feature on specialty copper alloys for Plastic Mould industry.